13-17 Subaru Crosstrek Hella Horn Bracket
Need a bracket to hole those Loud Hella Horns? well here you go. Made out of 5052 series laser cut aluminum .08 Thick. Bracket is raw aluminum and has awesome dimple dies :D
For install: remove the original horn, and the other 12mm bolt next to it. loosen up the top two hood release bolts and slide the bracket under the hood release. tighten up. when tightening the drivers side bolt you will see that it will bend the bracket some, this is fine. you can bend the bracket easy back with your hand to make it straight.